How to Calculate GPA

Published: November 19, 2026

Here is how to calculate GPA: multiply each course’s grade points by its credit hours, add those results together, and divide the sum by your total credit hours. That one formula covers a semester GPA, a cumulative GPA and a college GPA, and it works the same way whether you use a calculator or a pencil. The sections below walk through a worked example, the 4.0 scale, cumulative and weighted GPA, and the cases most guides skip, such as pass/fail courses and retakes.

What GPA means and the formula

Grade point average (GPA) is a credit-weighted average of your course grades. It is not a plain average of letters, because a 4-credit course should move your GPA a lot more than a 1-credit course does, since it represents more of your workload. The University of Wyoming registrar states the same idea in one line: GPA is the sum of grade points earned divided by the credit hours attempted for a letter grade.

GPA = (grade points x credit hours, added across all courses) / total credit hours

Grade points for one course are the point value of the letter grade times the course’s credit hours. Some schools call these quality points.

The 4.0 grade scale with plus and minus values

Most US colleges and high schools convert letter grades to points on a 4.0 scale. The values below are the common plus/minus version. Your school may use different values, so check its grading policy before you rely on them.

Letter gradeGrade points
A4.0
A-3.7
B+3.3
B3.0
B-2.7
C+2.3
C2.0
C-1.7
D+1.3
D1.0
D-0.7
F0.0

Not every school uses plus and minus grades. The Wyoming GPA page, for example, lists whole-letter values of A = 4.000, B = 3.000, C = 2.000, D = 1.000 and F = 0.000. If your transcript has no pluses or minuses, use the whole-letter values.

Worked example: one semester

Take five courses with these grades. Multiply the grade points by the credits for each row, then add the last column.

CourseGradeGrade pointsCreditsPoints x credits
English 101A4.0312.0
Calculus IB+3.3413.2
BiologyB3.039.0
HistoryC+2.336.9
Physical educationA-3.713.7
Total1444.8

Divide the total points by the total credits: 44.8 / 14 = 3.2. Your semester GPA is 3.2. Notice that the 4-credit calculus grade and the 1-credit gym grade carry very different weight in the final result, even though each is just one line of the table.

Want to skip the arithmetic? Calculate yours with our GPA calculator, then use this guide to check the result.

How to calculate cumulative GPA across semesters

Cumulative GPA uses the same formula over every term. Do not simply average your semester GPAs, because that ignores how many credits each term had, and a heavier term should count for more. Add up the total points and total credits first, then divide once.

Suppose that before the semester above you had 30 credits and a 3.40 GPA, which is 30 x 3.40 = 102.0 points. Add this semester’s 44.8 points and 14 credits: (102.0 + 44.8) / (30 + 14) = 146.8 / 44 = 3.34. Your cumulative GPA is 3.34. Averaging 3.40 and 3.2 would give 3.30, which is wrong because the two terms had different credit loads.

How to calculate college GPA

College GPA follows the same formula, with two practical differences. Credits vary from course to course, so you must use each course’s credit hours rather than counting courses. And colleges set their own rules for which attempts count. Look for these on your registrar’s page:

  • Credit hours per course
  • Plus/minus values
  • Pass/fail rules
  • Repeat policy

If your grades are percentages rather than letters, convert each one to a letter first. The next section shows how that conversion works.

Converting percentage grades to letter grades

When a course reports a percentage, convert it to a letter grade before you look up grade points, because the points table works on letters. The ranges below are one common example and not a standard, since the cutoffs are set by your instructor or school, so replace them with the scale in your syllabus.

Percentage (example only)Letter gradeGrade points
93 to 100A4.0
90 to 92A-3.7
87 to 89B+3.3
83 to 86B3.0
80 to 82B-2.7
70 to 79C range2.0 to 2.3

Weighted vs unweighted GPA

Unweighted GPA uses the plain 4.0 scale. Weighted GPA adds bonus points for harder courses such as honors, AP or IB classes. The size of the bonus varies by school. A typical setup adds 0.5 for honors and 1.0 for AP, but some schools use different amounts or only weight certain courses, so ask your counselor for your school’s table.

Here is the same set of five equal-credit courses scored both ways, using a +1.0 AP bonus and a +0.5 honors bonus as an illustration.

CourseGradeUnweighted pointsWeighted points
AP BiologyA4.05.0
Honors EnglishB3.03.5
Algebra IIB3.03.0
SpanishA4.04.0
ArtA4.04.0
Total / 5 courses18.0 / 5 = 3.619.5 / 5 = 3.9

The weighted figure can exceed 4.0, which is why you should always note which version a form or application asks for.

Pass/fail and audit courses, withdrawals and incompletes

Courses that do not earn a letter grade usually stay out of the formula, but each school makes its own rules about which marks count. The Wyoming registrar says credit hours are not counted for marks of W, S or U, or for an incomplete (I) still in effect. In practice, a pass/fail course normally changes neither your points nor your credit total, while an F in a pass/fail course may count at some schools. Read your registrar’s policy before you assume.

Retroactive grade replacement: how a retaken course changes your GPA

Repeat policies are the biggest reason two students with the same transcript can have different GPAs. The three schools below show the range:

SchoolWhat its policy says
University of DenverReplacement is available for eligible low grades. The replaced grade leaves the cumulative GPA, all attempts stay on the transcript, and the choice cannot be reversed.
Georgia TechUndergraduates can substitute up to two courses with a D or F. The excluded course’s credit hours are removed from the cumulative calculation.
University of WyomingFor a repeated course, only the last credit and grade count toward the cumulative GPA.

To see the effect, return to the 146.8 points over 44 credits above and imagine you retake the 3-credit History course (C+, 6.9 points) and earn an A (12.0 points). If both attempts count, the total is (146.8 + 12.0) / (44 + 3) = 158.8 / 47 = 3.38. If the new grade replaces the old one, it is (146.8 – 6.9 + 12.0) / 44 = 151.9 / 44 = 3.45. The same retake is worth about 0.07 more GPA under replacement.

What is a good GPA?

There is no single cutoff, because it depends on the goal. As plain arithmetic, a 3.0 is a B average, a 3.5 sits between a B+ and an A-, and a 4.0 means straight As. Scholarships, honors programs, graduate programs and employers each set their own minimums, so look up the number for the specific one you are aiming at. For high school, colleges usually read your GPA in the context of the courses you took and your school’s scale. For college, many graduate programs and employers ask for GPA only if it supports your application.

How to raise your GPA

Your GPA moves most when you act early, because each new term is a smaller share of the total as credits pile up. Use the math to pick your targets:

  1. Calculate your current points and credits so you know the exact numbers.
  2. Find the credits you still plan to take and compute the average you would need in them to reach your goal.
  3. Put the most effort into high-credit courses, since they carry the most weight.
  4. Check whether your school allows grade replacement before you repeat a course.
  5. Talk to an advisor about course load, tutoring and withdrawal deadlines.

Converting international grading scales to US GPA

If you studied under a percentage, points or class-based system, there is no universal formula to turn it into a 4.0 GPA. The receiving school or the credential evaluation service it requires does the conversion, so ask which one it accepts before you try to convert grades yourself.

Frequently asked questions

What is the formula for GPA?

GPA equals the sum of (grade points x credit hours) divided by total credit hours. Multiply each course’s grade points by its credits, add the results, then divide by the total credits.

What is a good GPA?

It depends on your goal. A 3.0 is a B average and a 3.5 is between a B+ and an A-. Scholarships, programs and employers set their own minimums, so check the one you are targeting.

How do I calculate GPA without credit hours?

If every course has equal weight, add the grade points and divide by the number of courses. Use credit hours whenever your courses differ in length.

Do pass/fail classes affect GPA?

At many schools a passing grade in a pass/fail course adds credits earned but does not enter the GPA. Rules vary, so confirm with your registrar.

Is weighted GPA higher than unweighted?

Usually, if you take honors, AP or IB courses, because they add bonus points. The bonus size depends on your school.

Was this article helpful?

Terry Williams

Written by

Terry is a Chicago-based writer and editor who creates practical, student-friendly guides on essay writing, research, and citation styles (APA, MLA, and Chicago). He’s spent 15+ years editing educational content and building clear examples that help readers apply rules without guessing. When he’s not revising drafts, he’s usually turning messy notes into clean outlines and hunting down the one detail everyone skips.